Stainless steel clamp pipe fitting installation operation introduction

Stainless steel clamping pipe fittings adopt a new connection method, crimping, using a special pressing tool to the parts that need to be connected for a compression molding, to prevent the phenomenon of loose dripping. This connection method has the advantages of high connection strength, good seismic performance, convenient structure and preventing on-site welding. It can be done in about 20 seconds with special tools. Save time, effort and cost.

Stainless steel clamp pipe fitting installation operation introduction:

1. Pipe feeding: Measure the size of the pipe, cut the pipe with electric machinery or manually cut the pipe, and prohibit toothless feeding.

2. Deburring: deburring the end of the nozzle with a special tool, or remove it with a file, scraper or other tool.

3. Check the sealing ring of the stainless steel pipe. Check that the seal ring is properly aligned and installed in the groove.

4. Pipe insertion: The depth of the pipe insertion into the pipe fitting socket matches the mark, and the adjustment amount is within 3mm. Check the depth of pipe insertion, do not damage the inside. Pipe seal ring.

5. Clamping operation: Please use special tools for compression operation.

6. Finished product: The pressed part of the final product must be neat and uniform.

Stainless steel clamp fittings are suitable for applications in hot and cold water systems, heating systems, medical systems, steam piping systems and industrial tubing systems.