Understand the installation and precautions of stainless steel groove pipe

Many people for the installation of stainless steel groove pipe have a lot of confusion, in the process of groove pipe installation should pay attention to what aspects?

When installing trench pipe fittings, precautions should be adjusted according to the size of the pipe. The rolling groove needs to be controlled at an appropriate level. If the pressure tube is replaced within this range, the depth position of the rolling groove needs to be readjust. When pressing down, turn off the oil return switch of the hydraulic pump first, and then press down hard, and the upper wheel is close to the outer wall of the pipe joint to open the power supply. From pulling out to the joint, the pipe fittings can be turned over two weeks ago, and the pipe can be pressed down without pulling out.

Groove pipe fittings, effectively prevent water leakage, the connection process uses three mechanical pipe fittings connected between the clamp and the pipe, between the clamp and the gasket, there is a certain gap between the pipe, when the external force is applied, the constant displacement between each other, the formation of three-dimensional deformation, does not affect the accessories, avoid the friction between the accessories, reduce noise.

See more stainless steel clamp fittings products