Three kinds of water leakage prevention process structure of stainless steel clamping pipe fittings

The clamping pipe fitting is a pipe mode that is connected by clamping clamp on both sides of the U-shaped groove of the pipe fitting connector. The principle of rigidity of metal materials and elastic compression ratio of sealing materials is used to maximize the length of the connector. The groove is called double compression type. Advantages of compression: Double compression pipe fittings inherit all the advantages of compression pipe fittings and make up for the shortcomings of single compression pipe fittings in the process of use.

Three kinds of water leakage prevention process structure of stainless steel clamping pipe fittings:

1. Anti-rotation principle: a special compression tool presses it into a hexagonal shape to prevent water leakage during rotation. The joint of the pipeline will not loosen or leak, and the stainless steel water pipe naturally has a long service life.

2. Pull-out principle: The central position of the clamping pipe fitting is small, but the two ends are large, and the pulling resistance is 3.0mpa. This is because even if the external vibration is large, the water pipe will not affect the water pipe. Transport of fluid media.

3. Leak-stopping principle: The U-shaped slot is equipped with an O-shaped sealing ring, which is radially contracted and tightly sealed. This is a leak stop, not a leak stop. In this way, the pressure applied to the inner wall of the water pipe is not as large as the pressure of ordinary pipe work products, and naturally, the resistance is also very small.

Clamp pipe system is one of the thin-wall metal pipe connection methods in China. Stainless steel clamp pipe fittings are widely used in many system fields such as direct drinking water, tap water, cold/hot water, heating, gas and sprinklers.

The clamping pipe fitting is a pipe mode that is connected by clamping clamp on both sides of the U-shaped groove of the pipe fitting connector. The principle of rigidity of metal materials and elastic compression ratio of sealing materials is used to maximize the length of the connector. The groove is called double compression type. Advantages of compression: Double compression pipe fittings inherit all the advantages of compression pipe fittings and make up for the shortcomings of single compression pipe fittings in the process of use.

Three kinds of water leakage prevention process structure of stainless steel clamping pipe fittings:

1. Anti-rotation principle: a special compression tool presses it into a hexagonal shape to prevent water leakage during rotation. The joint of the pipeline will not loosen or leak, and the stainless steel water pipe naturally has a long service life.

2. Pull-out principle: The central position of the clamping pipe fitting is small, but the two ends are large, and the pulling resistance is 3.0mpa. This is because even if the external vibration is large, the water pipe will not affect the water pipe. Transport of fluid media.

3. Leak-stopping principle: The U-shaped slot is equipped with an O-shaped sealing ring, which is radially contracted and tightly sealed. This is a leak stop, not a leak stop. In this way, the pressure applied to the inner wall of the water pipe is not as large as the pressure of ordinary pipe work products, and naturally, the resistance is also very small.

Clamp pipe system is one of the thin-wall metal pipe connection methods in China. Stainless steel clamp pipe fittings are widely used in many system fields such as direct drinking water, tap water, cold/hot water, heating, gas and sprinklers.